A well-maintained machine keeps your coffee tasting its best and lasts longer. Here you’ll find the care routines for the machines sold on Good Morning Coffee. Menu names may vary with the software version: always follow the on-screen messages and your machine’s manual.
Maintenance and warranty
Our machines come with a 2-year warranty for private customers and 1 year for businesses. The warranty does not cover faults caused by lack of maintenance or limescale: regular cleaning and timely descaling also protect your warranty.
The right rhythm
- Trays, water and exterior: every day of use.
- Milk circuit: every day of use, at the end of the day.
- Brewing unit: when the screen asks.
- Filter and descaling: according to the machine’s alerts and your water hardness.
Care products
Only use products compatible with your machine and follow their dosage. Technicup cleaning tablets →
Technicup Cup Office MC
Bean-to-cup machine with milk circuit. View the machine →
Daily care
When: Every day of use, ideally at the end of the day.
Products: Soft damp cloth, clean water.
- Empty, rinse and dry the grounds drawer and the drip tray.
- Put them firmly back in place: the machine detects them before restarting.
- Empty, rinse and refill the water tank with fresh water at room temperature.
- Wipe the exterior and the outlet area with a soft damp cloth.
Finish with the milk circuit cleaning (below).
Caution: Never remove the trays or tank during a drink or cycle, don’t switch off during a rinse, and never use abrasive products or a water jet.
Milk circuit cleaning
When: Every day of use, at the end of the day.
Products: Compatible milk circuit cleaner, a clean, large enough container.
- Start the deep milk circuit cleaning. On some interfaces a long press on “Rinse milk” opens it; a short press only rinses.
- Wait until the screen asks for the product before placing the milk tube in the solution.
- Let the cycle finish.
- When prompted, place the tube in clean water and complete all guided rinses.
- Put the tube back in fresh milk, or keep the milk refrigerated.
Caution: Follow the product dosage. Rinsing with water alone does not replace cleaning with product.
Brewing unit cleaning
When: When the screen asks, according to the manual.
Products: Compatible coffee cleaning tablets.
- Tap the three-bar icon at the bottom of the screen, then Service menu › Maintenance.
- Choose the deep cleaning of the brewing unit.
- Empty the trays when asked and let the first rinse run.
- Insert the tablet only when the screen asks, in the dedicated flap.
- Let the cycle and rinse finish, then empty the trays.
If a code is requested, enter 1609.
Caution: Never put the tablet in the bean hopper.
Replacing the water filter
When: When the machine signals it, or according to the cartridge and water hardness.
Products: Filter cartridge compatible with your tank.
- Remove the tank and the old cartridge.
- Prepare and fit the new cartridge according to its instructions.
- Fill the tank with fresh water and put it back.
- In the menu, choose Filter › Replace filter and complete the priming requested.
Caution: Does not apply if the machine is plumbed in or uses an external filter.
Descaling
When: When the screen asks; frequency depends on your water.
Products: Compatible descaler, a clean, large enough container.
- Open the maintenance menu and choose Descaling.
- Empty the trays and place a container under the outlets.
- Prepare the solution according to the descaler label and the screen instructions.
- Let the programme run, following each message.
- Rinse the tank thoroughly and complete all clean-water rinses until the end.
Caution: Follow the dosage. Never pour product into the bean hopper, don’t mix products and don’t use vinegar.
If an error message appears
When: As soon as a message blocks a drink.
Products: None.
- Check that the tank has water or the water supply is open.
- Check that the grounds drawer and drip tray are empty, properly in place and their contacts are dry.
- Check that there are beans in the hopper.
- On a milk machine, check that the tube is connected and in the milk.
- If the message persists, note it exactly with the model and serial number, and contact us.
Technicup Cup Office C
Compact bean-to-cup machine, no milk circuit. View the machine →
Daily care
When: Every day of use, ideally at the end of the day.
Products: Soft damp cloth, clean water.
- Empty, rinse and dry the grounds drawer and the drip tray.
- Put them firmly back in place: the machine detects them before restarting.
- Empty, rinse and refill the water tank with fresh water at room temperature.
- Wipe the exterior and the outlet area with a soft damp cloth.
Caution: Never remove the trays or tank during a drink or cycle, don’t switch off during a rinse, and never use abrasive products or a water jet.
Brewing unit cleaning
When: When the screen asks, according to the manual.
Products: Compatible coffee cleaning tablets.
- Tap the three-bar icon at the bottom of the screen, then Service menu › Maintenance.
- Choose the deep cleaning of the brewing unit.
- Empty the trays when asked and let the first rinse run.
- Insert the tablet only when the screen asks, in the dedicated flap.
- Let the cycle and rinse finish, then empty the trays.
If a code is requested, enter 1609.
Caution: Never put the tablet in the bean hopper.
Replacing the water filter
When: When the machine signals it, or according to the cartridge and water hardness.
Products: Filter cartridge compatible with your tank.
- Remove the tank and the old cartridge.
- Prepare and fit the new cartridge according to its instructions.
- Fill the tank with fresh water and put it back.
- In the menu, choose Filter › Replace filter and complete the priming requested.
Caution: Does not apply if the machine is plumbed in or uses an external filter.
Descaling
When: When the screen asks; frequency depends on your water.
Products: Compatible descaler, a clean, large enough container.
- Open the maintenance menu and choose Descaling.
- Empty the trays and place a container under the outlets.
- Prepare the solution according to the descaler label and the screen instructions.
- Let the programme run, following each message.
- Rinse the tank thoroughly and complete all clean-water rinses until the end.
Caution: Follow the dosage. Never pour product into the bean hopper, don’t mix products and don’t use vinegar.
If an error message appears
When: As soon as a message blocks a drink.
Products: None.
- Check that the tank has water or the water supply is open.
- Check that the grounds drawer and drip tray are empty, properly in place and their contacts are dry.
- Check that there are beans in the hopper.
- On a milk machine, check that the tube is connected and in the milk.
- If the message persists, note it exactly with the model and serial number, and contact us.
Technicup H3
Bean-to-cup machine with milk circuit. View the machine →
Daily care
When: Every day of use, ideally at the end of the day.
Products: Soft damp cloth, clean water.
- Empty, rinse and dry the grounds drawer and the drip tray.
- Put them firmly back in place: the machine detects them before restarting.
- Empty, rinse and refill the water tank with fresh water at room temperature.
- Wipe the exterior and the outlet area with a soft damp cloth.
Finish with the milk circuit cleaning (below).
Caution: Never remove the trays or tank during a drink or cycle, don’t switch off during a rinse, and never use abrasive products or a water jet.
Milk circuit cleaning
When: Every day of use, at the end of the day.
Products: Compatible milk circuit cleaner, a clean, large enough container.
- Start the deep milk circuit cleaning. On some interfaces a long press on “Rinse milk” opens it; a short press only rinses.
- Wait until the screen asks for the product before placing the milk tube in the solution.
- Let the cycle finish.
- When prompted, place the tube in clean water and complete all guided rinses.
- Put the tube back in fresh milk, or keep the milk refrigerated.
Caution: Follow the product dosage. Rinsing with water alone does not replace cleaning with product.
Brewing unit cleaning
When: When the screen asks, according to the manual.
Products: Compatible coffee cleaning tablets.
- Tap the three-bar icon at the bottom of the screen, then Service menu › Maintenance.
- Choose the deep cleaning of the brewing unit.
- Empty the trays when asked and let the first rinse run.
- Insert the tablet only when the screen asks, in the dedicated flap.
- Let the cycle and rinse finish, then empty the trays.
If a code is requested, enter 1609.
Caution: Never put the tablet in the bean hopper.
Replacing the water filter
When: When the machine signals it, or according to the cartridge and water hardness.
Products: Filter cartridge compatible with your tank.
- Remove the tank and the old cartridge.
- Prepare and fit the new cartridge according to its instructions.
- Fill the tank with fresh water and put it back.
- In the menu, choose Filter › Replace filter and complete the priming requested.
Caution: Does not apply if the machine is plumbed in or uses an external filter.
Descaling
When: When the screen asks; frequency depends on your water.
Products: Compatible descaler, a clean, large enough container.
- Open the maintenance menu and choose Descaling.
- Empty the trays and place a container under the outlets.
- Prepare the solution according to the descaler label and the screen instructions.
- Let the programme run, following each message.
- Rinse the tank thoroughly and complete all clean-water rinses until the end.
Caution: Follow the dosage. Never pour product into the bean hopper, don’t mix products and don’t use vinegar.
If an error message appears
When: As soon as a message blocks a drink.
Products: None.
- Check that the tank has water or the water supply is open.
- Check that the grounds drawer and drip tray are empty, properly in place and their contacts are dry.
- Check that there are beans in the hopper.
- On a milk machine, check that the tube is connected and in the milk.
- If the message persists, note it exactly with the model and serial number, and contact us.
Segafredo Mini SZ
- Every day: empty the capsule container and drip tray, refresh the water in the tank.
- Regularly: run water without a capsule to rinse the circuit.
- Descaling: according to the manual and your water hardness, with a compatible descaler.
- Only use Segafredo Coffee System capsules.
Milano NC CT
- Every day: empty the capsule container and drip tray, refresh the water in the tank.
- Regularly: run water without a capsule to rinse the circuit.
- Descaling: according to the manual and your water hardness, with a compatible descaler.
- Use Nespresso Original-compatible capsules (not Vertuo).
Need help?
Note the model, the serial number (label on the machine) and the message shown, then write to us at info@goodmorningcoffee.be.
Never open the casing or work inside the machine: that is a technician’s job.
